Archive for the " Modem " Category
Monday, November 2nd, 2009 By: admin Category :
Modem
The VLINK modems automatically add and delete MAC addresses, only passing packets across the VDSL link that are meant for the remote peered LAN.
2.1 FEATURES • Easy to install standalone VLINK modems (no configuration required) • Auto-MDIX Ethernet
• Auto-sensing full or half-duplex Ethernet • Auto-sensing 10/100Base-TX...
Monday, November 2nd, 2009 By: admin Category :
Modem
Reset and Restore to Factory Defaults: The restore to factory defaults feature will set the ADSL Modem to its factory default configuration by resetting the ADSL Modem. You may need to place the ADSL Modem into its factory defaults if the configuration is changed, you loose the ability to interface to the ADSL Modem via the...
Sunday, November 1st, 2009 By: admin Category :
Modem
A built-in cable modem transmits information between your home network and the Internet. An SBG900:
• Combines four separate products — a DOCSIS ® cable modem, IEEE 802.11g wireless access point, Ethernet 10/100Base-T connections, and firewall — into one compact unit
• Enables you to create a custom network sharing...
Saturday, October 31st, 2009 By: admin Category :
Modem
Modem PCI G10 modem is packed in a box and contains all the accessories required for normal operation:
Cardboard box. Modem PCI G10 modem. CD with User Manual and drivers. External GSM antenna (special orders only).
Leaflet “Quick Start Guide”. Note: The manufacturer does not supply the SIM card, which is mandatory for setting...
Saturday, October 31st, 2009 By: admin Category :
Modem
After plugging T-ModemUSB in, linux kernel should recognize the serial converter device. To make sure device is recognized, type the command ‘dmesg | tail’ in the console. There should be line similar to this in the command output: usb 2-1: FTDI FT232BM Compatible converter now attached to ttyUSB0. If device is not detected,...