Archive for the " Computer " Category
Friday, January 29th, 2010 By: admin Category :
Application
The very first output from a GIS came from a line printer attached to a large mainframe computer. Here it is the pdf content section previews for Ebook PDF 3D GIS A Technology Whose Time Has Come.
Sunday, November 22nd, 2009 By: admin Category :
Printer
The following illustrations show a standard network and fully configured printer. If you attach print media handling options to the printer, it may look more like the fully configured model. Items denoted with an asterisk (*) are options.
A number of menus are available to make it easy for you to change printer settings. The...
Saturday, November 21st, 2009 By: admin Category :
Printer
The control panel lights mean different things, depending on their sequence. Lights that are off, on, and/or blinking indicate printer conditions such as printer status, intervention, or service. The following table shows the most common light sequences. Click the indicated page for more information on what it means.
Primary...
Friday, November 20th, 2009 By: admin Category :
Printer
Make sure that the toner cartridge is installed in the printer. Also, the print motor must be idle and the printer must be in standby mode. In order to produce an engine test print, media must be loaded into the printer. The system checks for media in tray 2, then in tray 1, and finally in tray 3 (if installed). If media is...
Thursday, November 19th, 2009 By: admin Category :
Printer
When a cartridge is empty or extremely low, “INK OuT” will display on the LCD panel. Raise the ink levers on either side of the printer. The cartridge position indicator on the LCD panel will flash on and off, indicating which cartridge is low or empty. Be sure you have the correct color cartridge replacement for that position.